TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Buick Turbo Tech
Register FAQ Community Calendar Today's Posts Search

Buick Turbo Tech General technical support for the 86-87 Buick turbo cars

Reply
 
Thread Tools Display Modes
  #1  
Old 02-18-2008, 01:24 AM
hyboost's Avatar
hyboost hyboost is offline
Junior Member
 
Join Date: Feb 2008
Location: Lancaster NY
Posts: 9
Default Another turbo size question

I really need help deciding which turbo to install. I've gone through as much info as possible, rehashing as much info as my small brain can manage & I've about given up. I asked a question, what would I see more 1/4 time improvement doing, a new intercooler or a bigger turbo? Seeing I have an Alchy kit installed, I was advised by a good source that a turbo would be the answer. This car see's mostly street miles, going to the track 9 or 10 times during the summer. This is purely a summer driver, as it's only driven in nice weather. I am running a TE49 now, running 11.8 & 112 mph on avg. Usually a 1.6-1.65 60ft. 1/8 is 7.5 @ 89 mph. I have installed a small cooling fan in front of my stock intercooler, to help prevent heat soak when waiting in staging area, between runs. I really don't want to go with a BB turbo mostly because of the price. I was hoping to keep it around $800-$900 range. I am installing 60lb injectors & a T tweek chip. So,,, what turbo is going to get me low 11's,,, high 10's? Is this realistic? Or am I better off going with a bigger intercooler even though I am spraying alchy on my stock IC? See my sig for mods, they are all the standard stuff. Only thing internal was a cam(202-202 duration) & H.P. valve springs. Sorry so long but Wanted to give as much info out as possible & not write a book. Thanks a lot. Ken F. Lancaster NY.
__________________
86 GN. New setup this year. GT6162 turbo, 60lb injectors. TT Prom. SMC alchy kit. THDP (W/electric cutout, Good loud fun!) Tranny built by Brian Hofer w/ brake. PPC 3000 3300-10" L/U converter. + all the usual goodies.
Reply With Quote
  #2  
Old 02-18-2008, 11:57 AM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

Quote:
Originally Posted by hyboost View Post
I really need help deciding which turbo to install. I've gone through as much info as possible, rehashing as much info as my small brain can manage & I've about given up. I asked a question, what would I see more 1/4 time improvement doing, a new intercooler or a bigger turbo? Seeing I have an Alchy kit installed, I was advised by a good source that a turbo would be the answer. This car see's mostly street miles, going to the track 9 or 10 times during the summer. This is purely a summer driver, as it's only driven in nice weather. I am running a TE49 now, running 11.8 & 112 mph on avg. Usually a 1.6-1.65 60ft. 1/8 is 7.5 @ 89 mph. I have installed a small cooling fan in front of my stock intercooler, to help prevent heat soak when waiting in staging area, between runs. I really don't want to go with a BB turbo mostly because of the price. I was hoping to keep it around $800-$900 range. I am installing 60lb injectors & a T tweek chip. So,,, what turbo is going to get me low 11's,,, high 10's? Is this realistic? Or am I better off going with a bigger intercooler even though I am spraying alchy on my stock IC? See my sig for mods, they are all the standard stuff. Only thing internal was a cam(202-202 duration) & H.P. valve springs. Sorry so long but Wanted to give as much info out as possible & not write a book. Thanks a lot. Ken F. Lancaster NY.
Tough one to answer definitively. Let me just say what I believe from my own experience. First off, you want to run 10's and you definitely race it more than your average street guy.. you have a trans braked tranny.. Everything you mentioned has and can be done.... I just don't do it that way. I would use at least a 61-p trim, preferably ball-bearing. I would also use some kind of an upgraded IC, just because we need to be able to flow the air through it.. The benefits of these upgrades is you will see better all around spoolup, better performance getting into boost, better bottom end and the ball-bearing option will match up better with your current torque convertor.
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:22 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.