|
|
#1
08-25-2009, 02:29 AM
|
||||
|
||||
E-town
Ok i start the post.who is going to e-town for the labor day?
__________________
2001 GMC sierra buick GN 1987 stageII RPE 400 turbo revers patern spicer 1350 u joint and yokes 33 splines axels with 3:42.fast XFI all job done by cotton's performance. tune by me 9.34 . 1.37 60ft 1/8 5.97@116MPH 9.20 148.79mph 1.419 60fts 1/8 5.91 119.67mph special thanks to cottons performance for the job well done 
|
|
#2
08-25-2009, 02:15 PM
|
||||
|
||||
Count us in.
Nicole has just finished wallpapering the back bedroom in the motorhome and hanging blinds. We brought it through state inspection 2 weeks ago and it passed!!! For the GN, I just got to get a couple of exhaust gaskets for my crossover pipe and one of those stainless steel band exhaust clamps to secure the two piece slip pipe(crossover). I noticed that the one pipe was not even seated where it joins to the header,so I had a pretty good exhaust leak. After that I just have to change the oil, check everything over and load it in the trailer. We are really excited. Can't wait to see everyone! Quick 16, here we come.... 
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar. New best 9.44 @ 143! 
|
|
#3
08-25-2009, 09:10 PM
|
||||
|
||||
We'll be there!...
We'll be there too on Saturday and Sunday, but "Buick-less"
 The GN is at Jack's shop right now to have the new RPE engine installed, a 4" custom downpipe made as well as a custom made intercooler, an aftermarket shifter installed, etc... I'll be there with my girlfriend Claude, both my sons Vincent & Benoit with their girlfriends too. I'll also be bringing Benoit's Dakota R/T pickup truck so he can make a few passes down the E-Town track  . Looking forward to seeing everyone! Claude & Claude.
__________________
1987 Buick Grand National 9.70 e.t. @ 139.35 mph 1971 Chevelle SS 2008 Ford F-350 Crew Cab Dually 2012 Lincoln MKX
|
|
#4
08-26-2009, 03:39 PM
|
||||
|
||||
|
Quote:
Now as far as the RPE motor, that wouldn't be the one that was laying around Jack's for a bit is it.....
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar. New best 9.44 @ 143!
|
|
#5
08-26-2009, 07:42 PM
|
||||
|
||||
|
Quote:
Claude.
__________________
1987 Buick Grand National 9.70 e.t. @ 139.35 mph 1971 Chevelle SS 2008 Ford F-350 Crew Cab Dually 2012 Lincoln MKX
|
|
#6
08-26-2009, 09:51 PM
|
||||
|
||||
|
Quote:
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car!
|
|
#7
09-02-2009, 07:18 PM
|
|||
|
|||
|
I plan to go at least for Sunday and maybe even Saturday. Weather looks PERFECT! Temps in the low 70's!!! Bubba Lee, you going???
__________________
Night Train 87 TType, XFI, 66-BB, Alky, MT DRs 11.0 @ 120
|
|
#8
09-03-2009, 02:54 PM
|
||||
|
||||
|
No, unfortunately I can't make it. Was going to call you this morning.
This has been a bad year. I still don't have a truck to drive. I have 2 1/2 at the house, but nothing to drive. Arlene and I were going to jump in the car and shoot down there Saturday, and maybe even spend the night so that we could get away from it all for the weekend, hang out with friends, and watch. BUT......as my luck would have it, it ain't happening. I have some family stuff going on early Sunday, so we can't spend the night, and stuff on Saturday, so we can't make it then. I am trying to get another truck so that I will be ready for Cecil in October if anyone is going to that. But I digress........not going to E-town. Anyone else that is going? I want to hear stories!!
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
|
|
#9
09-03-2009, 03:02 PM
|
||||
|
||||
|
I'ma going sat and sunday!!! The wedding I thought was sat... was last sat!!!
Bubba Lee... got a buddy here with a beautiful 2002 Dodge dually, 4x4 like mine for sale... it's a beauty, white, excellent condition.... diesel.. give me a call...
__________________
Jack Cotton Cottons Performance 413-789-0531
|
|
#10
09-03-2009, 03:15 PM
|
|||
|
|||
|
Last week my son saw a 98/97 Dodge Diesel at a Dodge dealer in West Brookfield along Rt. 9. I think he said they were asking $6900, so you know they would go lower.
__________________
Night Train 87 TType, XFI, 66-BB, Alky, MT DRs 11.0 @ 120
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
