|
|
#1
09-23-2008, 04:38 PM
|
|||
|
|||
2004r Trans
I Just Got My Stage 2 2004r Trans Put In With A P.i. 3400 Lock Up Converter And It Jumps And Jerks From 2 To 3 And Downshifting From 3 To 2 And 2 To 1 What Could Be Wrong.i Had It Done By A Trans Pro.just Wanted A Second Opinion.
Thanks Tom 
|
|
#2
09-23-2008, 05:03 PM
|
||||
|
||||
|
Sticky TCC solenoid. ??
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
|
|
#4
09-23-2008, 06:22 PM
|
||||
|
||||
|
Sorry about that. I was trying to answer in a hurry. It sounds like maybe your Torque Converter is staying locked.
TCC is your Torque Converter Clutch solenoid. It is located near the front of the tranny (I think, I always see it when I am lying underneath the car). You have to pull the pan to get to it. You remove two nuts/bolts, and it slides right out. You just have to splice the wires from the new one, and put it in and button up the pan. Does it act as if it is going to stall when you come to a stop? If you just tap the gas when driving, does it act like a stick, and respond with jerkiness? Are the downshifts harsh? Have you tried calling the guys that built it to see what they think?
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
|
|
#5
09-23-2008, 06:23 PM
|
||||
|
||||
|
Not sure on the price. Probably not too expensive.
Any autoparts store should have it.
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
|
|
#7
09-24-2008, 11:08 AM
|
||||
|
||||
|
Cool. As long as your tranny guy is close. Otherwise, you're probably better off doing it yourself.
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
|
|
#9
09-25-2008, 01:49 PM
|
||||
|
||||
|
Sure, but unless he is paying for gas, then just drop the pan and do it yourself.
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
|
 |
| Bookmarks |
|
|
Linear Mode
