Down Pipe adapter

[GN4412]

Jack it's Ted from Canada
You set me up with a new turbo last week and I hope you can fix me up with this strange request.
I have a 3 inch stainless down pipe that utilized the stock elbow from the turbo. It is ported but I'm not happy with it. Do you have an elbow that I can weld onto my current down pipe that would eliminate the stock elbow. It would require the same internal waste gate. I'm just short on funds after my turbo purchase but since the motor is out I would like to make the required modification. Any recommendation would be appreciated.

Thanks in advance and thanks again for the great service.

It doesn't get better then Cotton's

Ted

[TurboBabe]

Originally Posted by GN4412

Jack it's Ted from Canada
You set me up with a new turbo last week and I hope you can fix me up with this strange request.
I have a 3 inch stainless down pipe that utilized the stock elbow from the turbo. It is ported but I'm not happy with it. Do you have an elbow that I can weld onto my current down pipe that would eliminate the stock elbow. It would require the same internal waste gate. I'm just short on funds after my turbo purchase but since the motor is out I would like to make the required modification. Any recommendation would be appreciated.

Thanks in advance and thanks again for the great service.

It doesn't get better then Cotton's

Ted

That's a tough one Ted..... maybe I can find one of the old oversized pucks for a stock elbow.... otherwise the only other option is a replacement THDP.. or one of our external wastegate setups... anybody out there got a good used pipe for TED....???

Jack...... I'm on Lorries screenname...

[lenc23]

i have a brand new rjc dp flange that im not using. its for an internal gate. make me an offer, i think it was like 100-120 from rjc. all you will need is a 3" elbow. lenny

[BrianHynes]

Thought there is a 3" stubby ( flange, puck w/actuator, and a short bend ) out there. I believe it was designed to help the TA guys who wanted to fab a DP. Don't know if it is what Lenny has, but you might want to check with Jason, or do a search on TB.com.