TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Buick Turbo Tech
Register FAQ Community Calendar Today's Posts Search

Buick Turbo Tech General technical support for the 86-87 Buick turbo cars

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2008, 03:43 PM
whitecobra98's Avatar
whitecobra98 whitecobra98 is offline
Senior Member
 
Join Date: Jan 2008
Location: western mass
Posts: 161
Default I'm gonna Blow this M'Fer Sky High

new scanmaster numbers from today after 3rd emissions failure
car warmed up in gear idling
02-296-671 tends to be a lot lower than usual
af 07
l8 48
bat 12.9
int 136
bl 149
clt 214
ats 128
r-800
tps .42
iac 40
cc 131 and climbs
mal 00

just installed tt emissions chip, and adjustable fuel regulator pressure set to 38 psi with line off per tt chip instructions

failed hc this time smells like big time fuel limit is 2.00 mine was 4.39
im ready to blow this m'fer sky high..first time it failed only for nox, cleaned egr out, plugged shut, new injectors and chip, failed nox and hc last time, this time it obviously failed HC again....help please, don't want to keep bugging Jack
Reply With Quote
  #2  
Old 06-01-2008, 03:28 PM
trbochrgd1's Avatar
trbochrgd1 trbochrgd1 is offline
I can't drive 55!
 
Join Date: Nov 2007
Location: North Jersey
Posts: 518
Default

How many ppm were the hc's at? You think the cat was ever tampered with?
Maybe try decarbing with GM top engine cleaner?
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar.

New best 9.44 @ 143!
Reply With Quote
  #3  
Old 06-02-2008, 10:56 AM
whitecobra98's Avatar
whitecobra98 whitecobra98 is offline
Senior Member
 
Join Date: Jan 2008
Location: western mass
Posts: 161
Default

i never thought of the cat...it could have been...i have the numbers at home....runs like crap now too...pops through the intake....so much for an emissions chip and lowering the fuel pressure.....it was 2 1/2 times the limit
Reply With Quote
  #4  
Old 06-02-2008, 11:45 AM
Mike_g's Avatar
Mike_g Mike_g is offline
2 Lemon Ades...
 
Join Date: Nov 2007
Location: Enfield, Ct
Posts: 256
Default

cam lobe wiped ?
__________________
If It Doesnt have a motor Its Not a sport, Its Just a game...
SOME PEOPLE SHOULD NOT OWN TOOLS
Reply With Quote
  #5  
Old 06-02-2008, 12:26 PM
whitecobra98's Avatar
whitecobra98 whitecobra98 is offline
Senior Member
 
Join Date: Jan 2008
Location: western mass
Posts: 161
Default

Quote:
Originally Posted by Mike_g View Post
cam lobe wiped ?
idles nice with the tt chip, i installed the adj regulator and emissions chip and it runs like shit now, and HC's are high...i could get an emissions waiver but that won't solve the problem..and with premium being 430 a gallon, i'd rather not waste any more than I need to
Reply With Quote
  #6  
Old 06-02-2008, 12:31 PM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

So what up Buck, are you around today.. come on down, I want to check a few things.. like the cat....
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
  #7  
Old 06-04-2008, 02:28 AM
trbochrgd1's Avatar
trbochrgd1 trbochrgd1 is offline
I can't drive 55!
 
Join Date: Nov 2007
Location: North Jersey
Posts: 518
Default

Quote:
Originally Posted by trbochrgd1 View Post
How many ppm were the hc's at? You think the cat was ever tampered with?
Maybe try decarbing with GM top engine cleaner?

!!!!!
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar.

New best 9.44 @ 143!
Reply With Quote
  #8  
Old 06-04-2008, 11:12 AM
whitecobra98's Avatar
whitecobra98 whitecobra98 is offline
Senior Member
 
Join Date: Jan 2008
Location: western mass
Posts: 161
Default

Quote:
Originally Posted by trbochrgd1 View Post
!!!!!
i wont smile too much until i get the sticker, then I can get stuff I WANT not NEED!!!!!!!!
Reply With Quote
  #9  
Old 06-04-2008, 11:53 AM
BrianHynes's Avatar
BrianHynes BrianHynes is offline
Nitro boy
 
Join Date: Dec 2007
Location: Northern New York
Posts: 732
Default

Nothing worse than spending money on things you have to have. Takes all the fun out of life! Good luck with your E test.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car!
Reply With Quote
  #10  
Old 06-04-2008, 12:04 PM
whitecobra98's Avatar
whitecobra98 whitecobra98 is offline
Senior Member
 
Join Date: Jan 2008
Location: western mass
Posts: 161
Default

Quote:
Originally Posted by BrianHynes View Post
Nothing worse than spending money on things you have to have. Takes all the fun out of life! Good luck with your E test.
good thing is, no matter how much I've already spent, the stuff I did spend the dough on were things I needed to do anyway, so it's not like I wasted it...if it clears up today i'll fire her up and hopefully get me a sticker..then bye bye emissions chip, hello fun
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.