TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Team Cotton's Performance > Ask Jack

Ask Jack The best place to find me for any reason

Reply
 
Thread Tools Display Modes
  #1  
Old 08-29-2008, 02:01 PM
cyabye's Avatar
cyabye cyabye is offline
Junior Member
 
Join Date: Aug 2008
Posts: 6
Default Downpipe!

Jack, I talked to you a couple of months ago about sending my turbo and headers to get Brian to make a downpipe for me. Is now a good time to send them? I need a 3.5 in with provision for external gate. I could have called, but thought I would make use of the new site.
__________________
87 We-4, Anderson Performance built stroker (sorry Jack) Champion race ported aluminums, Champion port matched intake (not the stock style), 76GTQ ball bearing turbo, RJC mega front mount, Razors dual nozzle alky, 83# injectors,Aeromotive A1000 fuel system with sumped tank, TA Performance headers (the real ones), Terry Houston 3" duals and Magnaflow mufflers, Janis built billet 200r4 with trans brake, Precision 3400 stall, lots of odds and ends.
Reply With Quote
  #2  
Old 09-02-2008, 09:46 AM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

Quote:
Originally Posted by cyabye View Post
Jack, I talked to you a couple of months ago about sending my turbo and headers to get Brian to make a downpipe for me. Is now a good time to send them? I need a 3.5 in with provision for external gate. I could have called, but thought I would make use of the new site.


Ok, not sure who this is, could you sign a signature. Thanks for using the site, in the end it is the best place to get me, not to mention it documents things for me since I can't remember chit... I ordered more pipe, hope to have it in a few weeks. These damn things are getting more expensive everytime I get in fresh metals....
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
  #3  
Old 09-02-2008, 06:21 PM
cyabye's Avatar
cyabye cyabye is offline
Junior Member
 
Join Date: Aug 2008
Posts: 6
Default

This is Sharif from Chapel Hill NC. I bought some Champion aluminums, scorpion roller rockers, roller cam kit, and Baer brake setup from you. It has been a couple months since we have spoken on the phone. The last time we spoke, I mentioned that I need to get a downpipe made and you said that you needed a couple of weeks to get cleared up and that I should call before sending my turbo and headers to you. Anyways, let me know when is good for you and I'll get those parts to you. I'll update my sig also.
__________________
87 We-4, Anderson Performance built stroker (sorry Jack) Champion race ported aluminums, Champion port matched intake (not the stock style), 76GTQ ball bearing turbo, RJC mega front mount, Razors dual nozzle alky, 83# injectors,Aeromotive A1000 fuel system with sumped tank, TA Performance headers (the real ones), Terry Houston 3" duals and Magnaflow mufflers, Janis built billet 200r4 with trans brake, Precision 3400 stall, lots of odds and ends.
Reply With Quote
  #4  
Old 09-04-2008, 09:58 AM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

Quote:
Originally Posted by cyabye View Post
This is Sharif from Chapel Hill NC. I bought some Champion aluminums, scorpion roller rockers, roller cam kit, and Baer brake setup from you. It has been a couple months since we have spoken on the phone. The last time we spoke, I mentioned that I need to get a downpipe made and you said that you needed a couple of weeks to get cleared up and that I should call before sending my turbo and headers to you. Anyways, let me know when is good for you and I'll get those parts to you. I'll update my sig also.
Ok, thanks Sharif..... too many calls to remeber who's who... Check with me in about 2 weeks, I should be able to get you going. Need to have you ready before Cecil County.
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
  #5  
Old 09-17-2008, 01:10 AM
hotair hotair is offline
The Engineer
 
Join Date: Dec 2007
Location: Albemarle, NC (near Charlotte)
Posts: 92
Default

Sharif,
Chapel Hill! Are you a member of GM_Turbo6@yahoogroups.com? It is a loose-knit group of TR owners in North Carolina. Give me a call at 704-983-2302.
Conrad Carter
Albemarle, NC
__________________
A BIG fan of Cotton's Performance! Jack has never steered me wrong! He is "The Man". Brian is "The Fabricator" and Gerry is "The Shipper"!
Reply With Quote
  #6  
Old 09-20-2008, 12:46 AM
cyabye's Avatar
cyabye cyabye is offline
Junior Member
 
Join Date: Aug 2008
Posts: 6
Default

Quote:
Originally Posted by hotair View Post
Sharif,
Chapel Hill! Are you a member of GM_Turbo6@yahoogroups.com? It is a loose-knit group of TR owners in North Carolina. Give me a call at 704-983-2302.
Conrad Carter
Albemarle, NC

I am not a member, but I will check it out. Did I meet you at one of the Jordan Lake gatherings? Anyway, Jack are you ready for me to ship my headers and turbo to get that downpipe made?
__________________
87 We-4, Anderson Performance built stroker (sorry Jack) Champion race ported aluminums, Champion port matched intake (not the stock style), 76GTQ ball bearing turbo, RJC mega front mount, Razors dual nozzle alky, 83# injectors,Aeromotive A1000 fuel system with sumped tank, TA Performance headers (the real ones), Terry Houston 3" duals and Magnaflow mufflers, Janis built billet 200r4 with trans brake, Precision 3400 stall, lots of odds and ends.
Reply With Quote
  #7  
Old 09-23-2008, 01:05 PM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

Quote:
Originally Posted by cyabye View Post
I am not a member, but I will check it out. Did I meet you at one of the Jordan Lake gatherings? Anyway, Jack are you ready for me to ship my headers and turbo to get that downpipe made?
Almost there.... we have 2 here now to do. Waiting on some material as I type..
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
  #8  
Old 09-23-2008, 09:50 PM
broke1 broke1 is offline
Member
 
Join Date: Aug 2008
Posts: 38
Default

Quote:
Originally Posted by JCotton1 View Post
Almost there.... we have 2 here now to do. Waiting on some material as I type..

________
How To Roll A Joint

Last edited by broke1; 08-15-2011 at 10:53 PM.
Reply With Quote
  #9  
Old 10-01-2008, 01:58 AM
cyabye's Avatar
cyabye cyabye is offline
Junior Member
 
Join Date: Aug 2008
Posts: 6
Default

Cool. Just let me know.
__________________
87 We-4, Anderson Performance built stroker (sorry Jack) Champion race ported aluminums, Champion port matched intake (not the stock style), 76GTQ ball bearing turbo, RJC mega front mount, Razors dual nozzle alky, 83# injectors,Aeromotive A1000 fuel system with sumped tank, TA Performance headers (the real ones), Terry Houston 3" duals and Magnaflow mufflers, Janis built billet 200r4 with trans brake, Precision 3400 stall, lots of odds and ends.
Reply With Quote
  #10  
Old 10-01-2008, 03:35 AM
Sam Colalillo's Avatar
Sam Colalillo Sam Colalillo is offline
Member
 
Join Date: Feb 2008
Posts: 47
Default

The down pipe will be worth the wait
Ask me how I know. My Kenne Bell headers and cross over fianlly fit correctly, thanks to Brian.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:43 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.