3" turbonetics silicon hose ?

[87turbot-type]

Hey Jack

I have your intercooler kit and a champion GN1 intake and the 3 x 3 red coupling in the kit isn't going to be long enough to hold the intercooler pipe to the TB.

Do you sell that same 3" Id coupling in a 5" length, that would do the trick.

Also wondering if your downpipes are stainless steal I couldn't find that answer anywhere? I want to switch from my china DP to a nice external gate DP.



Thanks Brandon from canada!

[JerrywithaG]

3" x 3"? odd... I'll send a longer one out to you Brandon.

also, the downpipes are aluminized(aluminiumized?) steel.

[87turbot-type]

You have my info jerry?

One other question you might be able to answer. Do you know what size push rods I need for harland sharp roller rockers with a stock flat tappet setup?

Mine are too long.

Thanks Brandon!

[JCotton1]

Brandon....... if that is a picture of the IC pipe, looks like you have the pipe on upside down...... check it out, the hose you received should be 4" long and should work fine.

[87turbot-type]

Really?

That one I have on there is from Jegs. 3x3

I only got two lower ones and one 2.5-3" one for the turbo in red. I didn't think there was a top one with the kit. Or that is what I assumed.

Im pretty sure it doesn't come close to fitting the other way with that intake?

If I need to order a 3x4 how much would it be?

Thanks Brandon.

[JCotton1]

Originally Posted by 87turbot-type

Really?

That one I have on there is from Jegs. 3x3

I only got two lower ones and one 2.5-3" one for the turbo in red. I didn't think there was a top one with the kit. Or that is what I assumed.

Im pretty sure it doesn't come close to fitting the other way with that intake?

If I need to order a 3x4 how much would it be?

Thanks Brandon.

Brandon, turn the pipe around, it will fit fine. I have never had a problem with that pipe on any intake... your kit should have come with 4 hoses... and all the clamps

[87turbot-type]

Ok I will turn it around and try it tonight. I know I only have three for some reason.

How much would it be to buy another 3x4" black one.

Thanks Brandon!

I'll call in a minute

[JCotton1]

Originally Posted by 87turbot-type

Ok I will turn it around and try it tonight. I know I only have three for some reason.

How much would it be to buy another 3x4" black one.

Thanks Brandon!

I'll call in a minute

it's free if you didn't get it... with your IC from us... ?

[87turbot-type]

Order ID: 1116

Just checked my email for that.

I will call any how have some more questions about a turbo. Wanting to go with a bigger unit I think.

Thanks Brandon!