TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Buick Turbo Tech
Register FAQ Community Calendar Today's Posts Search

Buick Turbo Tech General technical support for the 86-87 Buick turbo cars

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2010, 06:23 PM
waGoN's Avatar
waGoN waGoN is offline
Long Roofs are sexy!
 
Join Date: Nov 2007
Location: Messachusetts
Posts: 394
Default Fuel system ??

OK, Jack says that my fuel system needs some upgrading. I agree. I am using the same Walbro from when I built the car 10 years ago, and I'm upgrading the motor a bit, so need to upgrade the fuel system at the same time. I was just pricing the parts, but have a few questions.

I may sump the tank, since I have no trunk to put a cell, so even with a cell mounted underneath, it becomes a challenge to get fuel into it.

I am planning to get the Aeromotive for a pump. Should I go with the A1000 or the Eliminator? The A1000 is cheaper, but not if I have to upgrade later.
F.A.S.T. on the other hand has a fuel system kit which may save a couple of dollars in the end, but is the pump any good.

For line size: What sizes do I want?
This is what I am guessing I should use, but guessing isn't always fun when working with flammables.
-10AN from the tank to the pump, and from pump to the filter
-8AN from the 'Y' to the fuel rails
-8AN from rails to regulator (or can I use -6AN)
-6AN from regulator to the tank

I may start off using the factory fuel rails just to save some money up front, but then that would be a few wasted fittings and hose, so that wouldn't save me in the long run.

Also, is the factory return line sufficient, or do I have to run a new one? That is one way that I could save in the present without spending more by upgrading in the future.

Looking for ideas to do it right, without blowing all of my money on it.
I don't mind upgrading some parts later'but not if it means spending more overall, because I am buying some things twice.

Sooooo, suggestions, ideas?? Thanks.
__________________
Brian

Keep it shiny side up, but show them your dirty side once in a while.

11.3@123mph on 195/75/14" whitewalls. Yes, 195s!
11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
Reply With Quote
  #2  
Old 06-04-2010, 12:46 AM
waGoN's Avatar
waGoN waGoN is offline
Long Roofs are sexy!
 
Join Date: Nov 2007
Location: Messachusetts
Posts: 394
Default

No one has any input??
__________________
Brian

Keep it shiny side up, but show them your dirty side once in a while.

11.3@123mph on 195/75/14" whitewalls. Yes, 195s!
11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance.
Reply With Quote
  #3  
Old 06-04-2010, 01:32 AM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

Quote:
Originally Posted by waGoN View Post
No one has any input??

Check out the FAST EFI fuel system, I'm thinking we get the Eliminator pump and you are done. We'll fill in the rest of the pieces.. If not, we get you in cheaper and set you up with an A1000 pump and go from there. That would be your 2 choice from my perspective.. By the way, FAST is usung Aeromotive stuff...
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
  #4  
Old 06-29-2010, 01:53 AM
Sam Colalillo's Avatar
Sam Colalillo Sam Colalillo is offline
Member
 
Join Date: Feb 2008
Posts: 47
Default aeromotive 11104 pump

I went 9.27 with an old style eliminator pump I got from Jack. Fuel pressure was still solid with that pump. I had a -10 supply line with a -6 return line and never had any fuel related problems. It supported 9.3's no problem but any faster and I would get the pro series. The eliminator also worked well on the street.
__________________
1987 Buick WE4
9.27 @ 145.74 MPH in TSM eliminations
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:32 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.