|
|
#1
08-13-2008, 06:42 PM
|
|||
|
|||
RG45 hook up
Jack got the WG put the DP on tonight I am going to make the test pipe and go for a rip if it doesn't rain.
Instructions are kinda bad so... I am running off the compressor housing vacuum/boost to the bottom of the WG just one port. And I plugged one of the top ports and left the other one open. Is this correct? If it doesn't rain I am just going to run off the springs at the track on friday night. Thanks Brandon! 
|
|
#2
08-14-2008, 12:21 PM
|
||||
|
||||
|
Quote:
Brandon, I only hook the external gates up one way. I run the first line from the comp housing to the bottom of the wastegate. I then cut that line in half and put a tee there and run another line to my boost controller. I then run another line from the outlet of the boost controller to the top of the wastegate. Thats it, now I can adjust my boost level with the boost controller. On the RG45, there are an extra port on the the top and the bottom, plug them....
__________________
Jack Cotton Cottons Performance 413-789-0531
|
|
#3
08-14-2008, 03:07 PM
|
|||
|
|||
|
So Jack the controller is to atmoshpehere
|
|
#4
08-14-2008, 03:44 PM
|
||||
|
||||
|
Quote:
__________________
Jack Cotton Cottons Performance 413-789-0531
|
|
#5
08-14-2008, 03:48 PM
|
|||
|
|||
|
Ok well I have to order that boost controller than.
Last edited by 87turbot-type; 08-14-2008 at 06:58 PM.
|
 |
| Bookmarks |
|
|
Linear Mode
