Need some help
Ok, motor is back in, sealed tight except for the crack in the manifold at the coolant temp sensor. I try to start her up and get a "puff" of pressure from the exhaust and the motor bogs the starter down. It will not start up and Im not sure what to do, I have no cam tool but it is degreed in per caspers instructions and others. primed the oil pump until lifters were getting oil.
everything is hooked up right, i do not have an EGR anymore or the solenoid, could that be a problem?
no heat or ac anymore either.
any and all help is greatly appreciated.
__________________
Steve Sadek
U.S. Marine Corps
Sgt / Active Duty
1985 Buick Electra T-Type (RIP)
1987 Buick Grand National (work in progress)
2006 Subaru WRX Wagon (not stock)
|
08-25-2012, 01:40 PM
Hybrid Mode
