TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Alky / Meth Injection
Register FAQ Community Calendar Today's Posts Search

Alky / Meth Injection Where the alchoholic can seek help for his addiction. It's an anonymous forum...

Reply
 
Thread Tools Display Modes
  #1  
Old 02-07-2008, 01:31 AM
sverble's Avatar
sverble sverble is offline
Born Into This
 
Join Date: Dec 2007
Posts: 7
Default What's the advantage of progressive vs. non?

Obviously I'm asking cause I have non and I wonder if it's lacking some. My question is that if you get knock at given boost level, then why not have the alcy come on at that point? Why does it come on progressively? Does it not need to go at the full volume that you need to take out the knock? It seems that the boost goes up so fast that there wouldn't be time to apply the alcy "progressively". Does the knock materialize progressively? so that you want to only have the alcy come on in a kind of mirror progression? Is that supposed to be more efficient than applying alcy all at once?
__________________
89 TTA -first and original owner, 34k miles.
http://www.my89turbotransam.com
CPT-61, THDP, Turbo Tweak, 60# inj., Electronic dump pipe, SMC Alcy Inj. stock exhaust from cat back.
Reply With Quote
  #2  
Old 02-07-2008, 01:56 PM
Razor Razor is offline
Junior Member
 
Join Date: Dec 2007
Posts: 16
Default

Two reasons.

See if you knock at 15 PSI.. and you activate the system at 15 PSI.. you will knock until the alcohol hits the combustion chamber.. think of it as ping ping ping... then clean. So by activating it earlier, by the time your at 15 PSI.. there is alcohol in the chamber. Understand if your motor knocks at 15 PSI it doesnt start to knock instantly.. it needs to be at 15 PSI for a brief amount of time before it does knock. So starting the system earlier cures the knocking at 15 PSI.

Now here goes the next issue. Lets say you need 1 oz per second at 15 PSI to control knock. You activate the system at 8 PSI to assure you have spray when the boost reaches 15 PSI. Now at 8 PSI 1 oz per second is too much and cuases the air fuel to drop hard. So the motor bogs when it activates at 8 PSI. This is why progressive controllers are needed so they can spray .2 ounce at 8 PSI and 1 oz at 15 PSI. And when the boost climbs to 20 PSI.. now its spraying 1.5 ounce... and when it creeps to 25 PSI.. its at 2 ounces per second. These numbers are thrown out and to be used for illustration purposes.

One last one.. if your boost is lets say 15 PSI and your pump pressure is 50 PSI thats a 35 PSI differencial. When your boost goes to 20.. its down to 30=less. Or at 8 PSI 42 PSI=more.. so at lower boost levels you actually overwhelm the engine easier due to the added pressure. So the system when on fixed pressure actually works backwards and gives less as the boost rises.

Hope this helps.
Reply With Quote
  #3  
Old 02-07-2008, 03:32 PM
sverble's Avatar
sverble sverble is offline
Born Into This
 
Join Date: Dec 2007
Posts: 7
Default

Thanks for the explanation, that was helpful.
__________________
89 TTA -first and original owner, 34k miles.
http://www.my89turbotransam.com
CPT-61, THDP, Turbo Tweak, 60# inj., Electronic dump pipe, SMC Alcy Inj. stock exhaust from cat back.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:46 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.