TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Turbochargers and related components

Turbochargers and related components Whats new, tech questions, what's your favorite and why... turbos, wastegates and boost controllers

Reply
 
Thread Tools Display Modes
  #1  
Old 02-27-2008, 06:55 PM
NUKLRSIX NUKLRSIX is offline
Junior Member
 
Join Date: Nov 2007
Posts: 12
Default Gtk-850

Is anyone using the new GTK-850 turbo (72mm)? How does it compare to other turbos used?

How is the spool and driveability?

Thanks

Datar
__________________
87 GN
Stroked, Girdled, Solid roller cam, GTK-72BB S-trim .85A/R, GN1's, XFI-T/C box, Cottons FMIC, Razors dual nozzle alky, TA Headers, Len Freeman 200r4, PTC 9.5" N/L
Reply With Quote
  #2  
Old 02-27-2008, 10:30 PM
BrianHynes's Avatar
BrianHynes BrianHynes is offline
Nitro boy
 
Join Date: Dec 2007
Location: Northern New York
Posts: 732
Default

Check with Mike Nogradry. I believe that is the turbo he has. Don't know for sure if he has run it prior on his car, 'cause his car is under construction at the moment.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car!
Reply With Quote
  #3  
Old 02-27-2008, 11:41 PM
trbochrgd1's Avatar
trbochrgd1 trbochrgd1 is offline
I can't drive 55!
 
Join Date: Nov 2007
Location: North Jersey
Posts: 518
Default

Quote:
Originally Posted by BrianHynes View Post
Check with Mike Nogradry. I believe that is the turbo he has. Don't know for sure if he has run it prior on his car, 'cause his car is under construction at the moment.
Datar had pm'ed me already. I told him I hadn't run with it yet. I don't know of anyone else with that turbo. I am curious myself how it's going to be.
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar.

New best 9.44 @ 143!
Reply With Quote
  #4  
Old 02-28-2008, 06:48 PM
NUKLRSIX NUKLRSIX is offline
Junior Member
 
Join Date: Nov 2007
Posts: 12
Default

Jack mentioned a guy from ST. Louis is using one, hopefully he can post his expierence with it.
__________________
87 GN
Stroked, Girdled, Solid roller cam, GTK-72BB S-trim .85A/R, GN1's, XFI-T/C box, Cottons FMIC, Razors dual nozzle alky, TA Headers, Len Freeman 200r4, PTC 9.5" N/L
Reply With Quote
  #5  
Old 03-03-2008, 03:52 AM
Phoneguy Phoneguy is offline
Brother Jack is my Pastor
 
Join Date: Nov 2007
Location: O'fallon MO (St Louis area)
Posts: 25
Default

I'm the guy in St Louis with the GT-K 850. This turbo is NASTY. I'm trying to chase down some gremlins in-between snow storms and ice storms. I haven't been able to get a decent tune to tell how fast it will spool but the big end is VERY NASTY. Not looking good for weather. 70* today and 10" of ice and snow by Tuesday. Will keep you posted when I figure it out.

Bryan
__________________
Bryan


87 GN with 43k
Stock block Champion GN1 14 bolt, ARP bolts, Cottons valve covers, Comp Cams 218/212 hyd roller, Scorpion rockers, Comp Cams double roller, home ported intake, Champion 1" plenum spacer, RJC PowerPlate, Turbonetics GT-K 850 BB, 3" DP with external wastegate, Cottons 4" cold air kit, Cottons FMIC, 72# inj, FAST XFI, ALKYCONTROL, Hooker cat back, Art Carr 9" NLU, Art Carr internals,Precision turbo saver, Metco adjustable uppers, Metco lowers, HR sway bar, MT DRs
Reply With Quote
  #6  
Old 03-03-2008, 03:46 PM
trbochrgd1's Avatar
trbochrgd1 trbochrgd1 is offline
I can't drive 55!
 
Join Date: Nov 2007
Location: North Jersey
Posts: 518
Default

Quote:
Originally Posted by Phoneguy View Post
I'm the guy in St Louis with the GT-K 850. This turbo is NASTY. I'm trying to chase down some gremlins in-between snow storms and ice storms. I haven't been able to get a decent tune to tell how fast it will spool but the big end is VERY NASTY. Not looking good for weather. 70* today and 10" of ice and snow by Tuesday. Will keep you posted when I figure it out.

Bryan
That's sounds good! I have somthing to look forward to! Did you end up going with the Gtk 1000 with the 850 cover? Got any pics of it installed?
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar.

New best 9.44 @ 143!
Reply With Quote
  #7  
Old 03-04-2008, 02:27 AM
Phoneguy Phoneguy is offline
Brother Jack is my Pastor
 
Join Date: Nov 2007
Location: O'fallon MO (St Louis area)
Posts: 25
Default

The GT-K turbos NORMALLY come with a 4 bolt exhaust housing, so there is no way to get a 1000 with a 850 cover with a standard 3 bolt GN housing. I got an S trim .85 AR. The GT-K 1000 uses an HP76 wheel while the GT-K 850 uses an HP72 wheel. The GT-K cover on the inlet is the same. The only way to get the 1000/850 combo is with a 4 bolt which will get you their new ceramic coated housing.

Bryan
__________________
Bryan


87 GN with 43k
Stock block Champion GN1 14 bolt, ARP bolts, Cottons valve covers, Comp Cams 218/212 hyd roller, Scorpion rockers, Comp Cams double roller, home ported intake, Champion 1" plenum spacer, RJC PowerPlate, Turbonetics GT-K 850 BB, 3" DP with external wastegate, Cottons 4" cold air kit, Cottons FMIC, 72# inj, FAST XFI, ALKYCONTROL, Hooker cat back, Art Carr 9" NLU, Art Carr internals,Precision turbo saver, Metco adjustable uppers, Metco lowers, HR sway bar, MT DRs
Reply With Quote
  #8  
Old 05-11-2008, 05:02 AM
NUKLRSIX NUKLRSIX is offline
Junior Member
 
Join Date: Nov 2007
Posts: 12
Default

Any news on how this turbo performs at the track?

Datar
__________________
87 GN
Stroked, Girdled, Solid roller cam, GTK-72BB S-trim .85A/R, GN1's, XFI-T/C box, Cottons FMIC, Razors dual nozzle alky, TA Headers, Len Freeman 200r4, PTC 9.5" N/L
Reply With Quote
  #9  
Old 05-11-2008, 12:03 PM
TurboBabe's Avatar
TurboBabe TurboBabe is offline
The Boss
 
Join Date: Nov 2007
Location: With Jack
Posts: 1,362
Default

Quote:
Originally Posted by NUKLRSIX View Post
Any news on how this turbo performs at the track?

Datar
We're waiting for you to tell us how it performs......

opps, sorry Lorrie, it's me again using Lorries computor... Jack
__________________
Lorrie
www.cottonsperformance.com

Last edited by TurboBabe; 05-11-2008 at 12:05 PM.
Reply With Quote
  #10  
Old 05-18-2008, 05:16 PM
NUKLRSIX NUKLRSIX is offline
Junior Member
 
Join Date: Nov 2007
Posts: 12
Default

I now have a GTK-850! Have to give props to Jack for hooking me up with Turbonetics (Brian Cerny), customer service was great! I should have the car running with the new stroker combo in 2 weeks.
__________________
87 GN
Stroked, Girdled, Solid roller cam, GTK-72BB S-trim .85A/R, GN1's, XFI-T/C box, Cottons FMIC, Razors dual nozzle alky, TA Headers, Len Freeman 200r4, PTC 9.5" N/L
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.