4" downpipe.....

[JCotton1]

Ok guys, this is the SS pipe we are making for Brian H. We also are reworking a set of the SS CHina TA Perf. headers. The following are pictures of Brians car and getting set up... in the shop.

[JCotton1]

Here's some pics of the headers as we began the process of 2 days plus, modifing and making the flanges lines up, welding and porting the port inlets, then replacing the v-band garbage with real v-band kits. We also replaced the 3bolt flange with a 4 bolt T4 flange





the lone port on the end is the one needing the most work, welding up one side and porting the other, elongating the stud holes

[JCotton1]

Next, we decided to cut open the log across from each exhaust tube, it wasn't pretty and as you can see, we did a bit of port work then weld the plate back in...



here's the 2 ports closest to the crossover flange, cyl # 4,6









here are some pics of cyl #2

[JCotton1]

Ok... the Down pipe.....

[NUKLRSIX]

Nice attention to detail! The inside of those headers were a mess before the massaging.

Datar

[JRGN]

Hey, that TUBING looks, like I know that tubing, glad you are putting it to good use. Jr.

[JBR]

Hey Brian,,,,are you not a Tig Master???

[BrianHynes]

Originally Posted by JBR

Hey Brian,,,,are you not a Tig Master???

Are you refering to this.