TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Engine Tech
Register FAQ Community Calendar Today's Posts Search

Engine Tech A great place to get info related to V6 engines, cams, pistons, heads... etc.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-28-2008, 01:42 PM
Paul Paul is offline
Junior Member
 
Join Date: Oct 2008
Posts: 2
Default Front cover r&r

I got a terrible oil leak somewhere around front cover or brass oil pressure block or maybe PTE adapter cover. Thinking about taking off aftermarket cover and putting on used GM cover. Question is isn't there some of the cover bolts that may leak (go thru into the block) if not sealed up with thread sealer? I wrapped shop towels and some duct tape around the PTE plate and front cover and ran the car to eliminate possible VC leak and it stopped the oil blowing up on the underside of the header pipe like it was doing so it has to be front cover, brass block or sending unit for oil pressure, or maybe PTE screw on cover. Drainback tube gasket is okay and dry..used the GM black thick one's on that. Also don't the oil pan need to be dropped to do the cover? Thanks in advance.
Reply With Quote
  #2  
Old 12-01-2008, 01:51 PM
JCotton1's Avatar
JCotton1 JCotton1 is offline
Married Man
 
Join Date: Nov 2007
Location: Paradise
Posts: 1,434
Default

Quote:
Originally Posted by Paul View Post
I got a terrible oil leak somewhere around front cover or brass oil pressure block or maybe PTE adapter cover. Thinking about taking off aftermarket cover and putting on used GM cover. Question is isn't there some of the cover bolts that may leak (go thru into the block) if not sealed up with thread sealer? I wrapped shop towels and some duct tape around the PTE plate and front cover and ran the car to eliminate possible VC leak and it stopped the oil blowing up on the underside of the header pipe like it was doing so it has to be front cover, brass block or sending unit for oil pressure, or maybe PTE screw on cover. Drainback tube gasket is okay and dry..used the GM black thick one's on that. Also don't the oil pan need to be dropped to do the cover? Thanks in advance.
Paul, I doubt it is the cover, although I have seen one of the bolt not installed on the oil pump side of the cover cause a pretty good leak. 2nd or 3rd bolt up is easy to miss. Also on the PTE turbo saver, isf you tighten it down too much the O-ring can crack and leak. We lube the o-ring to prevent this from happening. I dislike the replacement covers, lots of other problems with them. I always prefer using the stock covers with a HV pump.
__________________
Jack Cotton
Cottons Performance
413-789-0531
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:19 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.