TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS  

Go Back   TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS > Technical Forums > Suspensions, Street and Strip
Register FAQ Community Calendar Today's Posts Search

Suspensions, Street and Strip This is where we talk about new and different suspension packages and what works best for your type of driving

Reply
 
Thread Tools Display Modes
  #1  
Old 08-25-2008, 07:18 PM
BrianHynes's Avatar
BrianHynes BrianHynes is offline
Nitro boy
 
Join Date: Dec 2007
Location: Northern New York
Posts: 732
Default M/T slicks

What compound are you using? Thanks
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car!
Reply With Quote
  #2  
Old 08-28-2008, 05:24 AM
PaceCarTA's Avatar
PaceCarTA PaceCarTA is offline
Da Big Cheese
 
Join Date: Dec 2007
Location: central NJ
Posts: 50
Default

the 3055 28 x 10.5 that we use uses M5 compound, available with different sidewalls 3055 (std), 3055S (stiff ), and 3055W (wrinkle)
the 3055W due to the softer sidewall has a wider sidewall width 12.0" vs the 11.7" of the 3055/3055S

the 3055C uses L4 compound ( softest compound they make) and is meant for dragsters and lightwieght cars


im running the 3055 (stock frame and rolled fender lips, no air bags) which are a tight fit and only rub the frame when i make tight turns with a spool , probably more tire than i need . I'm considering going with 28x9" on the next set which come with the L8 compound ,

to read more on the differences in sidewall and compounds
http://www.mickeythompsontires.com/s...p?item=ETDrag#
__________________
Paul... NJ rep MAGNABUICK.com
the 86 3450lbs ...1.44 6.19@112 9.72@138 ,
109 234cu stock mains and bolts , irons,
the 87 ttop ,1.37 6.0@ 114 9.45 @ 141.9 25 psi !!
109 235cu .gn1 alum, certified roll cage .
the 87gnx'd FAST B2B TA49 ..back to all stock original #s 109 and trans hipro w stagerite
the 87 GN ttop ..all stock with vac brakes
86 WH1 mini tubbed roll caged 109, extreme 2004r
all on pump 93 and alkycontrol

Last edited by PaceCarTA; 08-28-2008 at 05:29 AM.
Reply With Quote
  #3  
Old 08-29-2008, 11:55 AM
BrianHynes's Avatar
BrianHynes BrianHynes is offline
Nitro boy
 
Join Date: Dec 2007
Location: Northern New York
Posts: 732
Default

Thanks Paul. I ended up going with the 3055's and mounted them on a 8" wheel. I mounted them yesterday, and will install them on the GN today to test the fit. I also have some 3055's on 10" rims and I also rolled my fenders. They are tight (but look like they will clear). Last time at the track with the 10" rims w/o rolled fenders, I had to run 15psi in the air bags to keep them from kissing the fenders. I measured the section width of the 28-10.5 on the 8" wheel, and the section width is 1" less than on the 10" wheel with tread width remaining the same. I think this set up will be perfect, and I can leave the suspension where it should be.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car!
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.