|
|
|||||||
| Shop Work In Progress Up to date visuals of builds and repairs |
 |
|
|
Thread Tools | Display Modes |
|
#11
12-18-2012, 08:35 PM
|
||||
|
||||
Keep an eye out for the twist
|
|
#12
12-19-2012, 02:49 PM
|
||||
|
||||
|
wiring almost done... and barely seen!
     
|
|
#13
12-19-2012, 03:04 PM
|
||||
|
||||
|
manual brakes ...rrrrracecar
__________________
Paul... NJ rep MAGNABUICK.com the 86 3450lbs ...1.44 6.19@112 9.72@138 , 109 234cu stock mains and bolts , irons, the 87 ttop ,1.37 6.0@ 114 9.45 @ 141.9 25 psi !! 109 235cu .gn1 alum, certified roll cage . the 87gnx'd FAST B2B TA49 ..back to all stock original #s 109 and trans hipro w stagerite the 87 GN ttop ..all stock with vac brakes 86 WH1 mini tubbed roll caged 109, extreme 2004r all on pump 93 and alkycontrol
|
|
#14
12-19-2012, 07:32 PM
|
||||
|
||||
|
I recently did the TRZ rack on kidgloks car
was able to squeek the input shaft behind the alternator (champion alternator only bracket from youz guys) with the TA headers adding an inch to the stock column would have made header clearance a little better but it worked had to make my own brackets for the frame as that stamped piece and standoff wouldnt fit between the rack and also doing the rjc crank pulley he shaved 50lbs http://turbobuick.com/forums/threads...ersion.386715/ and the kit for manual with that bracket i did on murphster , he has stock rotors calipers and drums and stops from 134 (3700lb) just fine both take a little getting used to ...like driving an old farm truck
__________________
Paul... NJ rep MAGNABUICK.com the 86 3450lbs ...1.44 6.19@112 9.72@138 , 109 234cu stock mains and bolts , irons, the 87 ttop ,1.37 6.0@ 114 9.45 @ 141.9 25 psi !! 109 235cu .gn1 alum, certified roll cage . the 87gnx'd FAST B2B TA49 ..back to all stock original #s 109 and trans hipro w stagerite the 87 GN ttop ..all stock with vac brakes 86 WH1 mini tubbed roll caged 109, extreme 2004r all on pump 93 and alkycontrol Last edited by PaceCarTA; 12-19-2012 at 08:04 PM.
|
|
#15
12-20-2012, 09:10 PM
|
||||
|
||||
|
Ok Jerry Fess up who's motor is it..
The car in the pic is an Imposter..Not the true Pumkin 
__________________
If It Doesnt have a motor Its Not a sport, Its Just a game...
SOME PEOPLE SHOULD NOT OWN TOOLS
|
|
#16
12-20-2012, 09:58 PM
|
||||
|
||||
|
It's not the Pumpkin...It belongs to someone from N.Y state...By the way, the clue here is that "real" Pumpkin has an orange painted firewall...
See the picture below (the "real" Pumpkin)... Claude. 
__________________
1987 Buick Grand National 9.70 e.t. @ 139.35 mph 1971 Chevelle SS 2008 Ford F-350 Crew Cab Dually 2012 Lincoln MKX Last edited by toofastforyou; 12-20-2012 at 10:01 PM.
|
|
#17
12-27-2012, 09:34 PM
|
||||
|
||||
|
Sharp eye claude...
TRZ rack almost done.       
|
|
#18
12-27-2012, 09:35 PM
|
||||
|
||||
|
Brian starting the headers...
   
|
|
#20
12-28-2012, 05:16 AM
|
||||
|
||||
|
tie rods shouldnt be on the top
the hardware bolts for attaching the tierod ends on the spindle arm go under the arm....
__________________
Paul... NJ rep MAGNABUICK.com the 86 3450lbs ...1.44 6.19@112 9.72@138 , 109 234cu stock mains and bolts , irons, the 87 ttop ,1.37 6.0@ 114 9.45 @ 141.9 25 psi !! 109 235cu .gn1 alum, certified roll cage . the 87gnx'd FAST B2B TA49 ..back to all stock original #s 109 and trans hipro w stagerite the 87 GN ttop ..all stock with vac brakes 86 WH1 mini tubbed roll caged 109, extreme 2004r all on pump 93 and alkycontrol Last edited by PaceCarTA; 12-28-2012 at 05:20 AM.
|
|
| Bookmarks |
|
|
Linear Mode
