Quote:
Originally Posted by Psycho6
I am currently running your basic roller cam 206/206 I believe on stock heads w t&d roller rockets 1.55. I purchased the whole kit from you. After the first set of liters was no good you sent me the racing ones. After installation setting lash etc its still loud. I am up to a full turn and still no difference. I set and tested @ 1/4 intervals. I dismantle once again to notice the pushrods are rubbing. I only took the rockets off on one side and noticed all the pushrods have rub marks on them. I want to test the spring pressure and was wondering what it should be? They are the K-Motion ones. What should be my next step? Any tips suggestions are greatly appreciated.. thx Jack.
|
Not sure what or how loud "loud" is... but it is not unusal to hear the lifters, no matter what ones we use. I have used the new Morel lifters with pretty much no differance at all in the sounds coming from the top end.. As for adjustment, I recommend (zero lash then 1\4 to 1\3 turn). That is the most I would tighten the lash. When you say rubbing are you saying you see the metal worn off or the side of the rod is shiney?