|
Buick Turbo Tech General technical support for the 86-87 Buick turbo cars |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
I'm gonna Blow this M'Fer Sky High
new scanmaster numbers from today after 3rd emissions failure
car warmed up in gear idling 02-296-671 tends to be a lot lower than usual af 07 l8 48 bat 12.9 int 136 bl 149 clt 214 ats 128 r-800 tps .42 iac 40 cc 131 and climbs mal 00 just installed tt emissions chip, and adjustable fuel regulator pressure set to 38 psi with line off per tt chip instructions failed hc this time smells like big time fuel limit is 2.00 mine was 4.39 im ready to blow this m'fer sky high..first time it failed only for nox, cleaned egr out, plugged shut, new injectors and chip, failed nox and hc last time, this time it obviously failed HC again....help please, don't want to keep bugging Jack |
#2
|
||||
|
||||
How many ppm were the hc's at? You think the cat was ever tampered with?
Maybe try decarbing with GM top engine cleaner?
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar. New best 9.44 @ 143! |
#3
|
||||
|
||||
i never thought of the cat...it could have been...i have the numbers at home....runs like crap now too...pops through the intake....so much for an emissions chip and lowering the fuel pressure.....it was 2 1/2 times the limit
|
#4
|
||||
|
||||
cam lobe wiped ?
__________________
If It Doesnt have a motor Its Not a sport, Its Just a game...
SOME PEOPLE SHOULD NOT OWN TOOLS |
#5
|
||||
|
||||
idles nice with the tt chip, i installed the adj regulator and emissions chip and it runs like shit now, and HC's are high...i could get an emissions waiver but that won't solve the problem..and with premium being 430 a gallon, i'd rather not waste any more than I need to
|
#6
|
||||
|
||||
So what up Buck, are you around today.. come on down, I want to check a few things.. like the cat....
__________________
Jack Cotton Cottons Performance 413-789-0531 |
#7
|
||||
|
||||
i'm working but will definitely swing by...if I need an f'in cat, i'll get an f'in cat...i know the exhaust is hacked up to begin with....took it for a little drive yesterday and it didnt want to run at more than 1/4 throttle..parked it and shut the garage door
|
#8
|
||||
|
||||
Quote:
I have a 3 inch hi flow cat, to go along with that 3 inch ss ATR exhaust.
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar. New best 9.44 @ 143! |
#9
|
||||
|
||||
i hear ya, but at this point what I WANT is taking a back seat to what i NEED...i need this car to run right
|
#10
|
||||
|
||||
sorry big guy....couldnt make it down today..m'fer looked like the Hulk from all the pollen so I took the truck this morning..got home from work, started her up, stalled out and lost all the dash lights...turned key...NOTHING!!!!!!!!!! pulled hood release, attempted to pop hood by banging on it, no good, pulled lever harder, broke off in my hand, got pissed slammed handle back on, hood popped open, slammed hood back down after checking battery connection, car started, got pissed, backed it into garage running like shit....only major change in scanmaster numbers are 02's....they stayed in the 100's...maybe tomorrow..dont even want to look at that beotch right now...
|
Bookmarks |
|
|