|
Ask Jack The best place to find me for any reason |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
XFI Datalogger - Enable Wire?
Jack,
Two questions: 1. I see one wire in the harness that is labeled Datalog Enable. The manual mentions two wires...one to turn it on, one to start it running. Will the one wire (pink?) do both? I understand it just has to be grounded to do it's magic. 2. The two black ground wires...can I ground them to the nearest ground (dash) or do I need to run a ground to the frame? Conrad
__________________
A BIG fan of Cotton's Performance! Jack has never steered me wrong! He is "The Man". Brian is "The Fabricator" and Gerry is "The Shipper"! |
#2
|
||||
|
||||
Quote:
2. 2 black wires to ground, I usually ground them on the dashboard where the stock grounds are for the stock harness. You'll find the ground just above the stock computor location..
__________________
Jack Cotton Cottons Performance 413-789-0531 |
#3
|
|||
|
|||
Jack,
Crystal clear. Thanks. Conrad
__________________
A BIG fan of Cotton's Performance! Jack has never steered me wrong! He is "The Man". Brian is "The Fabricator" and Gerry is "The Shipper"! |
Bookmarks |
|
|