|
New Products Where we can share whats coming and you can tell us what you want... |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Mounting Netbook for XFI
Not new, just new to me. Works great at the track and on the street.
|
#2
|
||||
|
||||
Details? I have a netbook also. It was one of the best investments for the car. I'd like to make a mount also. What did you use for supports, and how did you attach it? Thanks in advance.
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance. |
#3
|
|||
|
|||
Mounting Netbook for XFI
Using the top two bolts on the a/c control box, I bent two braces around the top of the dash and drilled holes into the braces and the back of the netbook (in a safe spot). I also had to slightly modify (cut) the a/c stereo faceplate to fit the braces.
Clear as mud...? |
#4
|
||||
|
||||
Cool. Thanks. Is it easily removable, or do you have to unbolt the brackets?
__________________
Brian Keep it shiny side up, but show them your dirty side once in a while. 11.3@123mph on 195/75/14" whitewalls. Yes, 195s! 11.2 on the big giant slicks. What's the point? Maybe I'll go back to the whitewalls. They are lighter and have less rolling resistance. |
#5
|
|||
|
|||
Until I can figure out a quick release, I have to unbolt from a/c screws under radio cover.
|
#6
|
||||
|
||||
i have the acer one 8" screen and mounting was simple
piece of 10" velcro across radio pod top and on underside of laptop and small bracket i made from some 1.5" wide 1/16 flat stock that is pushed in above the vent (no screws) takes only a second to pull it from the car or to install and so far it has shown no signs of moving even with a t-brake launch
__________________
Paul... NJ rep MAGNABUICK.com the 86 3450lbs ...1.44 6.19@112 9.72@138 , 109 234cu stock mains and bolts , irons, the 87 ttop ,1.37 6.0@ 114 9.45 @ 141.9 25 psi !! 109 235cu .gn1 alum, certified roll cage . the 87gnx'd FAST B2B TA49 ..back to all stock original #s 109 and trans hipro w stagerite the 87 GN ttop ..all stock with vac brakes 86 WH1 mini tubbed roll caged 109, extreme 2004r all on pump 93 and alkycontrol |
Bookmarks |
|
|