|
Ask Jack The best place to find me for any reason |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
3" turbonetics silicon hose ?
Hey Jack
I have your intercooler kit and a champion GN1 intake and the 3 x 3 red coupling in the kit isn't going to be long enough to hold the intercooler pipe to the TB. Do you sell that same 3" Id coupling in a 5" length, that would do the trick. Also wondering if your downpipes are stainless steal I couldn't find that answer anywhere? I want to switch from my china DP to a nice external gate DP. Thanks Brandon from canada! Last edited by 87turbot-type; 06-23-2008 at 01:11 PM. |
#2
|
||||
|
||||
3" x 3"? odd... I'll send a longer one out to you Brandon.
also, the downpipes are aluminized(aluminiumized?) steel. |
#3
|
|||
|
|||
You have my info jerry?
One other question you might be able to answer. Do you know what size push rods I need for harland sharp roller rockers with a stock flat tappet setup? Mine are too long. Thanks Brandon! |
#4
|
||||
|
||||
Brandon....... if that is a picture of the IC pipe, looks like you have the pipe on upside down...... check it out, the hose you received should be 4" long and should work fine.
__________________
Jack Cotton Cottons Performance 413-789-0531 |
#5
|
|||
|
|||
Really?
That one I have on there is from Jegs. 3x3 I only got two lower ones and one 2.5-3" one for the turbo in red. I didn't think there was a top one with the kit. Or that is what I assumed. Im pretty sure it doesn't come close to fitting the other way with that intake? If I need to order a 3x4 how much would it be? Thanks Brandon. |
#6
|
||||
|
||||
Quote:
__________________
Jack Cotton Cottons Performance 413-789-0531 |
Bookmarks |
|
|