|
The Lounge A place we can all just hang and shoot it.. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
ZEX turbo kit #82218
Thinking I'm going to get me one of these today. I'm going to call it "boost assist". Should shorten up the 60 fts.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car! |
#2
|
||||
|
||||
Is it a 50 shot?
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar. New best 9.44 @ 143! |
#3
|
||||
|
||||
It adjusts from 25hp - 75hp. You can also adjust @ what boost level it will disarm. There is also a pressure compensator that will adjust the fuel solenoid to changes in bottle psi. I'm going to start with the liitle jets. I wanted this kit to take some of the heat off the trans when staging.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car! |
#4
|
||||
|
||||
Been doing some thinking and talking. I'm going to look into having the XFI turn on the juice @ about 2,500 rpm and let the Zex boost control turn it off @ around 15psi. I'm also going to purge the nitrous into the front of the intercooler for added cooling instead of waisting it into the air like the import brothers. I might even get fancy and buy or make a bar set up for the purge so I can cool the intercooler on demand. Time will tell!
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car! |
#5
|
||||
|
||||
Oh man, I am definetly interested in this one. I like the idea of purging it into the intercooler, two benefits in one.
__________________
87 GN, RPE built 109 stroked, RJC girdle, billet main caps, custom comp roller cam, Champion ported aluminum heads, Champion aluminum intake, T&D 1.65 rockers, 96 lb injectors, Accufab 70mm throttle body RJC pullies, RJC A/C bracket,GTK-850, ATR headers,Deeds electronic boost controller, Cotton’s 4 inch down pipe w/ Turbonetics RG 45 gate, XFI, Cotton’s front mount, Level 10 built 400 trans w/brake, Converter? ,33 spline Moser axles, Spool, HR bar. New best 9.44 @ 143! |
#6
|
||||
|
||||
Well, after picking some brains yesteray, I know what I need to do to have the FAST control the nitrous activation. I'm headed to my local speed shop this morning to pick up some parts.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car! |
Bookmarks |
|
|