Quote:
Originally Posted by CDSTTYPE
Brian I Use Nitrous To Spool My 80mm On 235 Inch Engine.on The Log I Can Achieve Launch Boost In .9 Seconds. I Would
Not Use Boost Pressure To Turn It Off. I Arm My Nos Relay
With The T Brake Button And Use A Rpm Window Switch To
Control The Relay. There Is No Need To Spray All The Way To Launch
Boost. A Quick Shot Will Get Her Going Plus If Your Controling
Your Launch Boost With A Stutter Box Or Dumping Boost
With A Controller You Dont Want To Be Spraying.the First Couple
Of Pounds Is The Hurtle.i Also Use Aux 4 To Turn The Juice Back On
At The Big End Of The Track. ALSO PIN C24 IS BEING USED.
|
Thanks for your input. I think I have settled on using the ZEX kit the way they designed ie, triggering the NOS with WOT TPS voltage. The boost turn off point is fully adjustable, so I will off it at 10 psi (for now) and let the Deeds control launch boost from that point. I will however use the FAST to control the minimum RPM at which the nitrous can spray. At this point, I will use Aux 1 (pin B1) to turn on the juice @ 2,600 via a relay in the arming switch. This NOS stuff definitely reqires a learning curve.
Jack---did you get my pins for the XFI?