Quote:
Originally Posted by 87we410877
Yes. Shouldnt my target a/f be around 11.5? 13.5 seems too lean.
It doesn't idle that smooth. Every second or two you get a little miss and it smells pig rich. From what i remember i should go around the bouble about 1 box in each direction and page up. Is this the way to lean it out? Then my actual a/f should change. Thanks!!!
|
You can change the idle A/F to 11.5-12.0, but it won't matter much as we are in open loop at that RPM. If you are getting the lean skip, adding numbers will richen it up. If you are getting a rich smell, what is your actual A/F? If it is 11.0 or lower, highlite the 9-12 boxes around the bubble and page down to lean it out, page up to richen it. Watch your actual A/F to see what your A/f is while you adjust the numbers. Make sure your plugs are in good condition and not fouled out. That means you have to remove all 6 plugs and look at them...
