Thread: M/T slicks
View Single Post
  #3  
Old 08-29-2008, 11:55 AM
BrianHynes's Avatar
BrianHynes BrianHynes is offline
Nitro boy
 
Join Date: Dec 2007
Location: Northern New York
Posts: 732
Default

Thanks Paul. I ended up going with the 3055's and mounted them on a 8" wheel. I mounted them yesterday, and will install them on the GN today to test the fit. I also have some 3055's on 10" rims and I also rolled my fenders. They are tight (but look like they will clear). Last time at the track with the 10" rims w/o rolled fenders, I had to run 15psi in the air bags to keep them from kissing the fenders. I measured the section width of the 28-10.5 on the 8" wheel, and the section width is 1" less than on the 10" wheel with tread width remaining the same. I think this set up will be perfect, and I can leave the suspension where it should be.
__________________
'86 Gn with an RPE bullet. Almost everything else is from Cottons. 100% street car!
Reply With Quote