Quote:
Originally Posted by stevestatix
Machinist mentioned that the rocker arms with their plastic stopper dont look to good. Recommended that i upgrade to roller rockers but isnt pushing it on me, just keeping me informed. Looking for your thoughts.
Block cleaned and bored .20
Glass beaded intake and pleneum
Cleaned and ported heads
3 angle valve job
new comp cams full kit 212/212
crank 10-10 grind
diamond pistons, i need to order these from you today.
42lb injectors
will be getting scat rods and other items from you also.
|
The stock rockers are fine in that condition, for the record. But yes I do recommend the T&D roller rockers, especially going with the roller cam. We also carry them as well..