Quote:
Originally Posted by 87turbot-type
Jack got the WG put the DP on tonight I am going to make the test pipe and go for a rip if it doesn't rain.
Instructions are kinda bad so... I am running off the compressor housing vacuum/boost to the bottom of the WG just one port. And I plugged one of the top ports and left the other one open. Is this correct?
If it doesn't rain I am just going to run off the springs at the track on friday night.
Thanks Brandon!
|
Brandon, I only hook the external gates up one way. I run the first line from the comp housing to the bottom of the wastegate. I then cut that line in half and put a tee there and run another line to my boost controller. I then run another line from the outlet of the boost controller to the top of the wastegate. Thats it, now I can adjust my boost level with the boost controller. On the RG45, there are an extra port on the the top and the bottom, plug them....