LED vs Stock comparison
Here is a comparison of the LED vs Stock tailights. The pic's turned out crappy because it was raining out and I could'nt get far enough back but you can clearly see the differance between the two.
Video of them in action hopefully by Monday.
FIRST PIC IS THE RUNNING LIGHTS( look at the differance of the reflection on the bumper!) 
SECOND PIC IS OF THE BRAKES(look at the reflection on the ground from the LED's)
ORDER YOURS TODAY: http://www.injectionx.com/lightpage.html
Brake lights....
__________________
1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar
Last edited by scot w.; 03-01-2008 at 03:23 PM.
|