TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS

TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS (http://community.cottonsperformance.viper05.citasystems.net/forum/index.php)
-   ET's and MPH (http://community.cottonsperformance.viper05.citasystems.net/forum/forumdisplay.php?f=31)
-   -   11.358, 120.62 @ 22 psi (thanks Jack) (http://community.cottonsperformance.viper05.citasystems.net/forum/showthread.php?t=1656)

vacuum 6 04-21-2010 12:14 PM

11.358, 120.62 @ 22 psi (thanks Jack)
 
Thanks Jack for the great engine!!!!!!!!!!!!!!!!!!!

1st run - boost: 18 psi, timing: 24°/22°, O2s: .79

60' - 1.870
330 - 5.079
1/8 - 7.808
MPH - 90.26
1000 - 10.155
1/4 - 12.112
MPH - 115.80

MPH pickup: 25.54 (I knew it was going to be a good night)


Added boost and pulled fuel...

4th run - boost: 22 psi, timing: 24°/22°, O2s: .77

60' - 1.674
330 - 4.690
1/8 - 7.272
MPH - 95.61
1000 - 9.489
1/4 - 11.358
MPH - 120.62

MPH pickup: 25.01

Over the winter I did the following:
1) rewelded DS header
2) flow tested fuel pump and moved the hotwire to alt
3) got new alky pump from Julio (BIG DIFFERENCE)
4) new plugs
5) increased the trans psi

Not too bad for a 10 year old LU 12" 2800 convertor and stock MAF.

JCotton1 04-22-2010 01:27 PM

WOW!!!! That's great, your numbers look pretty darn good. The best part is you aren't even leaning on it yet. Heck, work on your 60ft, maybe a lb or 2 of boost and you've got an easy 10 second car!!! :eek:

vacuum 6 04-23-2010 11:32 AM

Right around the 1000' mark the thing pulled HARD. The above runs were with a 5000 2-3 shift...I'm thinking there's a few MPH left on the table. Need to shift 2-3 at 5500 maybe 5700.

JCotton1 04-23-2010 01:08 PM

Quote:

Originally Posted by vacuum 6 (Post 6881)
Right around the 1000' mark the thing pulled HARD. The above runs were with a 5000 2-3 shift...I'm thinking there's a few MPH left on the table. Need to shift 2-3 at 5500 maybe 5700.

Yep, definitely could improve shifting 5600 to 6000 rpm.. give it a shot.


All times are GMT. The time now is 01:09 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.