RG45 hook up
 

Jack got the WG put the DP on tonight I am going to make the test pipe and go for a rip if it doesn't rain.

Instructions are kinda bad so... I am running off the compressor housing vacuum/boost to the bottom of the WG just one port. And I plugged one of the top ports and left the other one open. Is this correct?

If it doesn't rain I am just going to run off the springs at the track on friday night.

Thanks Brandon!

Brandon, I only hook the external gates up one way. I run the first line from the comp housing to the bottom of the wastegate. I then cut that line in half and put a tee there and run another line to my boost controller. I then run another line from the outlet of the boost controller to the top of the wastegate. Thats it, now I can adjust my boost level with the boost controller. On the RG45, there are an extra port on the the top and the bottom, plug them....

So Jack the controller is to atmoshpehere

No, the outlet of our boost controller goes to the top of the wastegate.

Ok well I have to order that boost controller than.