TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS

TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS (http://community.cottonsperformance.viper05.citasystems.net/forum/index.php)
-   ET's and MPH (http://community.cottonsperformance.viper05.citasystems.net/forum/forumdisplay.php?f=31)
-   -   11.18 at 117 with a TA49 (http://community.cottonsperformance.viper05.citasystems.net/forum/showthread.php?t=984)

jhuber 10-19-2008 04:44 AM

11.05 at 118 with a TA49 (EDIT)
 
I got a couple runs in at E-Town. I was pushing 22lbs with a TA49!! I feel a little more timing and some more boost...10's???? Any suggestions Jack?

1st run: 11.22@117.88 with a 1.60-60
2nd run: 11.18@117.86 with a 1.57-60


JCotton1 10-21-2008 04:15 PM

Quote:

Originally Posted by jhuber (Post 4219)
I got a couple runs in at E-Town. I was pushing 22lbs with a TA49!! I feel a little more timing and some more boost...10's???? Any suggestions Jack?

1st run: 11.22@117.88 with a 1.60-60
2nd run: 11.18@117.86 with a 1.57-60


Wow, thats great!!!! I got just one suggestion for ya... CRANK IT UP!!!

PaceCarTA 10-25-2008 09:09 PM

update 10-24-08 new times on the ta49
 
1 Attachment(s)
well we turned it up just a wee bit this time at atco
24psi this time out , more fuel , little more timing , trimmed first fuel back a little

http://www.cottonsperformance.com/fo...1&d=1224977648

JCotton1 10-26-2008 11:40 AM

Nice run!!! you got that car rockin... How bout you share a little bit of what that combo consists of with us..:)

PaceCarTA 10-27-2008 12:54 AM

87 GN ttop 3600lb w/driver
TA49 w/.82 a/r garret exh housing , hd actuator
RJC boost controller
109 30over speedpro
10/10 stock crank/mains/rods/bolts...no girdle
bronsonian (j banning) ported 8445 heads , big valves
cotton supplied cometic .060 gaskets, arp 12pt bolts
stock rockers/shafts/pushrods,covers
cam is unknown flat tappet (just says new cam on the rebuild receipt)
stock coated headers/crossover
stock unported intake manifold/plenum/throttlebody
HR poly motor mounts
50# msd injectors,
TT 5.6 92 street chip
stock ecm
pte FMIC
micheals auto 2004r brf transmission -billet drum , 9.5 protorque 32-3400L/U
a/c p/s powermaster still functional
razor single nozzle alky (set at full gain), methanol
ugly blue plug wires ac r43ts plugs .032
stock coilpack /module
stock radiator/fan 160 therm
translator lt1 3" maf kn filter
mease 3" th style DP coated (open exhaust during run)
stock 8.5 rear , stock gears , stock posi, moser axles w cclip elims, TA girdle cover
southside lcas w/welded relocate brackets, stock uppers, comp eng 50/50 shocks
HRparts HD sway bar
centerline convo pro rims 275/60 15 mt et street radials
single walbro pump , hotwired
hooper super duper driver shaft loop
roll bar in the garage (he wont put it in the car :crazy: )
nut behind wheel

directscan, egt ,scanmaster, boost gauge , tach, fp hood gauge, ...driver doesnt look at any of them

trbochrgd1 10-27-2008 02:46 AM

Lol, I like the last two lines! Sounds like you really got that baby dialed in. Nice job! Got any plans for it over the winter?

jhuber 10-27-2008 10:47 PM

At one time it was a junk yard dog, 118k mile daily driver!!! T-tops and all. Junk man didn't even want it!!! Whoda thunk!!!!


All times are GMT. The time now is 09:09 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.