3" turbonetics silicon hose ?
Hey Jack
I have your intercooler kit and a champion GN1 intake and the 3 x 3 red coupling in the kit isn't going to be long enough to hold the intercooler pipe to the TB. Do you sell that same 3" Id coupling in a 5" length, that would do the trick. Also wondering if your downpipes are stainless steal I couldn't find that answer anywhere? I want to switch from my china DP to a nice external gate DP. http://memimage.cardomain.com/member...26_45_full.jpg Thanks Brandon from canada! |
3" x 3"? odd... I'll send a longer one out to you Brandon.
also, the downpipes are aluminized(aluminiumized?) steel. |
You have my info jerry?
One other question you might be able to answer. Do you know what size push rods I need for harland sharp roller rockers with a stock flat tappet setup? Mine are too long. Thanks Brandon! |
Brandon....... if that is a picture of the IC pipe, looks like you have the pipe on upside down...... check it out, the hose you received should be 4" long and should work fine.
|
Really?
That one I have on there is from Jegs. 3x3 I only got two lower ones and one 2.5-3" one for the turbo in red. I didn't think there was a top one with the kit. Or that is what I assumed. Im pretty sure it doesn't come close to fitting the other way with that intake? If I need to order a 3x4 how much would it be? Thanks Brandon. |
Quote:
|
Ok I will turn it around and try it tonight. I know I only have three for some reason.
How much would it be to buy another 3x4" black one. Thanks Brandon! I'll call in a minute |
Quote:
|
Order ID: 1116
Just checked my email for that. I will call any how have some more questions about a turbo. Wanting to go with a bigger unit I think. Thanks Brandon! |
All times are GMT. The time now is 03:13 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.