3" turbonetics silicon hose ?
 

Hey Jack

I have your intercooler kit and a champion GN1 intake and the 3 x 3 red coupling in the kit isn't going to be long enough to hold the intercooler pipe to the TB.

Do you sell that same 3" Id coupling in a 5" length, that would do the trick.

Also wondering if your downpipes are stainless steal I couldn't find that answer anywhere? I want to switch from my china DP to a nice external gate DP.

http://memimage.cardomain.com/member...26_45_full.jpg

Thanks Brandon from canada!

3" x 3"? odd... I'll send a longer one out to you Brandon.

also, the downpipes are aluminized(aluminiumized?) steel.

You have my info jerry?

One other question you might be able to answer. Do you know what size push rods I need for harland sharp roller rockers with a stock flat tappet setup?

Mine are too long.

Thanks Brandon!

Brandon....... if that is a picture of the IC pipe, looks like you have the pipe on upside down...... check it out, the hose you received should be 4" long and should work fine.

Really?

That one I have on there is from Jegs. 3x3

I only got two lower ones and one 2.5-3" one for the turbo in red. I didn't think there was a top one with the kit. Or that is what I assumed.

Im pretty sure it doesn't come close to fitting the other way with that intake?

If I need to order a 3x4 how much would it be?

Thanks Brandon.

Brandon, turn the pipe around, it will fit fine. I have never had a problem with that pipe on any intake... :) your kit should have come with 4 hoses... and all the clamps

Ok I will turn it around and try it tonight. I know I only have three for some reason.

How much would it be to buy another 3x4" black one.

Thanks Brandon!

I'll call in a minute

it's free if you didn't get it... with your IC from us... ?

Order ID: 1116

Just checked my email for that.

I will call any how have some more questions about a turbo. Wanting to go with a bigger unit I think.

Thanks Brandon!