TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS

TEAM COTTON'S PERFORMANCE TURBO BUICK ONLINE FORUMS (http://community.cottonsperformance.viper05.citasystems.net/forum/index.php)
-   Transmissions and Torque Converters (http://community.cottonsperformance.viper05.citasystems.net/forum/forumdisplay.php?f=14)
-   -   how fast can i take the 2004R (http://community.cottonsperformance.viper05.citasystems.net/forum/showthread.php?t=772)

I8AV8 08-26-2008 02:12 AM

how fast can i take the 2004R
 
i am building up my 86 T-Type and had the trans done by a local shop with a good rep, they did some of the performance basics. Other than the lock-up not working (a question for another thread...), i have had no problems with it.

i'd like to know just what the trans will take. i want to keep the OEM trans because i do drive the car daily (i just love driving it!).


thanks in advance.

Matt in Winnipeg.

BrianHynes 08-26-2008 10:23 AM

Quote:

Originally Posted by I8AV8 (Post 3395)
i am building up my 86 T-Type and had the trans done by a local shop with a good rep, they did some of the performance basics. Other than the lock-up not working (a question for another thread...), i have had no problems with it.

i'd like to know just what the trans will take. i want to keep the OEM trans because i do drive the car daily (i just love driving it!).


thanks in advance.

Matt in Winnipeg.

That's a tough question to answer, without knowing what has been done to the tranny. If it has all the good stuff (billet pieces, good clutches, pump, ect), I would say 9's are possible but you would be asking alot from the tranny. If you have a good stock rebuild, I would not try to push it faster than the 12's. If your lock up is not working, and everything is not up to snuff, have the trans guy get it right.

I8AV8 08-26-2008 02:09 PM

Thanks for the response. The trans has HD clutches, billet servo, shift kit (trans-go) and the stock pump. the convertor is 2800 LU. I took it back to get the LU working again and they got it working - i stored the car and when i brought it out last year the LU didn't work again, so i'm currently trying to figure that out. The goal for the car is low 11's, but i'm not opposed to a solid 10 sec run! do i need a different pump for that? any other 'must-do's' for the trans? (other than the converter, of course).

thanks again
Matt

WSLN 6 08-26-2008 04:43 PM

I would look into a billet forward drum minimum. I broke mine twice, once when shifting into second gear, once by locking the converter at WOT. (one of 100 times I did that lol)
I went with a 9.5" PTC N/L converter and it revs at about 2000rpm at 65 mph, not much different than a locking one.

I8AV8 08-27-2008 03:03 PM

thats interesting - i was trying to wire my lock-up to do just that. where do you get it?

JCotton1 09-06-2008 12:52 PM

Quote:

Originally Posted by I8AV8 (Post 3413)
thats interesting - i was trying to wire my lock-up to do just that. where do you get it?

We carry them, let me know if you want one, those are a non LU converter, but tend to couple much better than older non lu units..

turbonatr 09-10-2008 11:49 PM

My 2004R has seen TONS of very, very low 11 second and almost as many high 10 second passes (between 10.70s and 10.90s) in my 3660lb GN before it was swapped into my T-Type (along with a bunch of street miles). Converter is a N/L 9" Art Carr. No trans brake. Most of the drag strip passes were on 28x9" Hoosiers with 60ft times in the high 1.40s.

A seperate trans cooler is a MUST. Don't use the factory "cooler" which runs the fluid through the radiator. Have it built by a trans shop that knows the 2004R. I know a trans guy that makes his living building Power Glides and TH400s that live behind fire-breathing blown alky injected Big Block Chevys, but he couldn't get a 2004R to live in a 12 second car. Spend the money and go with a shop that has a reputation of building killer 2004Rs. It won't be cheap, but at least you know it'll be done right the first time.

JCotton1 09-11-2008 01:12 PM

Quote:

Originally Posted by turbonatr (Post 3705)
My 2004R has seen TONS of very, very low 11 second and almost as many high 10 second passes (between 10.70s and 10.90s) in my 3660lb GN before it was swapped into my T-Type (along with a bunch of street miles). Converter is a N/L 9" Art Carr. No trans brake. Most of the drag strip passes were on 28x9" Hoosiers with 60ft times in the high 1.40s.

A seperate trans cooler is a MUST. Don't use the factory "cooler" which runs the fluid through the radiator. Have it built by a trans shop that knows the 2004R. I know a trans guy that makes his living building Power Glides and TH400s that live behind fire-breathing blown alky injected Big Block Chevys, but he couldn't get a 2004R to live in a 12 second car. Spend the money and go with a shop that has a reputation of building killer 2004Rs. It won't be cheap, but at least you know it'll be done right the first time.


Great info Eddie, thanks~~!

waGoN 09-11-2008 03:18 PM

11s?? Go with a good performance rebuild.
Low 11s, get the billet parts. It'll cost more, but it will last longer.
Jack can set you up with whatever you need.
I finally got my tranny setup just right, so that it should have lived well into the 10s. Well that is if you don't tear the back of the motor off!

I8AV8 09-16-2008 06:44 PM

great info. I spent $2300 having the trans done up - but this brings up another question: when i took it back to have them look at the lock-up, they changed the fluid/filter as well. they said that the "ammount of sediment in the pan was equivilant to 80,000km of regular driving" but it only had 5000km on it (but 2 race weekends as well). is that normal for the HD clutches? i'm not a "jerkwater street peeler" nailing it at every light, but i did use slicks at the track.


All times are GMT. The time now is 09:46 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.