no spin, ok lots
Do you guys think you can get a good launch with 700 hp at the wheels and still have the stock suspension? I now have HR Parts N Stuff upper and lowers with rear sway bar Qa1 double adjustables all around monroso trick springs in the rear and Hotchkis in the front. Running a 295/55R/15 on a 10'' wheel. Thanks for any help.
|
Quote:
|
Ok, Thanks for the reply I will try to keep ajusting the shocks I am running mickey Thomson MT/ET radials I was told that hoosiers Quick
Time pro's would be a better for the street/track combo. Air bags are around 10 psi.Thanks Alot |
2 Attachment(s)
Quote:
The picture on the left is BEFORE installation of the H&R bar, and the picture on the right is AFTER the installation...(Both pictures were taken at the same track, in the same lane) Claude. :o |
Your car looks alot better than mine for sure on the launch. Can I ask how much power you have?
|
Quote:
As for the way the car launches, it's not that it's bad...just that with the engine I have, I'd expect the car to leave a lot harder. Thanks, Claude. :o |
Hey guys, I use an online HP calculator to figure your HP. I figured Claude's car weighs somewhere around 3800lbs with you in it. Your mph is about 137mph so far and since your HP is based on boost level, you're making around 900 flywheel-HP and about 750-775 wheel-HP. If we turn up the boost, those number will go higher. :D
As for your 60ft times Claude, I think we are doing better than before..... both pics show the wheels pulled, the 1st pic has the body twisted so the left wheel is a little higher.. :) Other than the pictures, the fact is the 1.44 60ft I had is the best 60ft? and it didn't spin...... so, I think we just need to get more track time and maybe we'll get that rear bumper dragging or at least a little more air under those tires... :) |
Quote:
Claude. :) |
What about up front anything for springs or A-arms?
|
Quote:
Claude. :) |
Thanks.
|
All times are GMT. The time now is 05:48 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.